NAME
liebert-esp2 - Driver for Liebert UPS, using the ESP-II serial protocol
NOTE
This man page only documents the hardware-specific features of the liebert-esp2 driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This is an experimental driver. You have been warned.
EXTRA ARGUMENTS
This driver supports the following optional settings in ups.conf(5):
- baudrate=num
-
Set the speed of the serial connection - 1200, 2400 (default), 4800, 9600 or 19200.
AUTHOR
Richard Gregory <R.Gregory at liverpool.ac.uk>, Arjen de Korte <adkorte-guest at alioth.debian.org>
SEE ALSO
The core driver:
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/