APCUPSD-UPS(8)

NAME

apcupsd-ups - Driver for apcupsd client access

NOTE ABOUT HISTORIC NUT RELEASE

Note	Two NUT websites This version of the page reflects NUT release v2.8.0 with codebase commited ff16dabca at 2022-04-04T11:04:28+00:00 Options, features and capabilities in current development (and future releases) are detailed on the main site and may differ from ones described here.

NOTE

This man page only documents the specific features of the apcupsd-ups driver. For information about the core driver, see nutupsdrv(8).

DESCRIPTION

This driver is a client to apcupsd (another UPS monitoring project).

apcupsd-ups acts as an apcupsd client, simply forwarding data. This can be useful in cases where both protocols are required in a network, or in case apcupsd has a required UPS access mode missing from NUT.

EXTRA ARGUMENTS

This driver supports the following optional settings in nut.conf(5):

port=<hostname>[:<port>]: This is the name of a remote host running apcupsd (plus an optional port).

For instance:

[apcupsd]
            driver = apcupsd-ups
            port = localhost
            desc = "apcupsd client"

BACKGROUND

This driver was originally written in one evening to allow interoperating with apcupsd.

SUPPORTED VARIABLES

The following variables are translated from apcupsd to NUT. All times should be converted to seconds (please file a bug if you notice a mismatch in units).

apcupsd variable	NUT variable(s)
`BCHARGE`	`battery.charge`
`MBATTCHG`	`battery.charge.low`
`RETPCT`	`battery.charge.restart`
`BATTDATE`	`battery.date`
`TIMELEFT`	`battery.runtime`
`MINTIMEL`	`battery.runtime.low`
`BATTV`	`battery.voltage`
`NOMBATTV`	`battery.voltage.nominal`
`LINEFREQ`	`input.frequency`
`SENSE`	`input.sensitivity`
`HITRANS`	`input.transfer.high`
`LOTRANS`	`input.transfer.low`
`LASTXFER`	`input.transfer.reason`
`LINEV`	`input.voltage`
`MAXLINEV`	`input.voltage.maximum`
`MINLINEV`	`input.voltage.minimum`
`NOMINV`	`input.voltage.nominal`
`LINEFREQ`	`output.frequency`
`OUTPUTV`	`output.voltage`
`NOMOUTV`	`output.voltage.nominal`
`DATE`	`ups.date, ups.time`
`DSHUTD`	`ups.delay.shutdown`
`DWAKE`	`ups.delay.start`
`FIRMWARE`	`ups.firmware, ups.firmware.aux`
`UPSNAME`	`ups.id`
`LOADPCT`	`ups.load`
`MANDATE`	`ups.mfr.date`
`NOMPOWER`	`ups.realpower.nominal`
`SERIALNO`	`ups.serial`
`STATUS`	`ups.status`
`ITEMP`	`ups.temperature`
`STESTI`	`ups.test.interval`
`SELFTEST`	`ups.test.result`

LIMITATIONS

Access to apcupsd is strictly read only: no commands can be issued. This stems from the design of apcupsd, where the settings are changed in apctest. In order to run apctest, apcupsd must be stopped (and apcupsd exposes the UPS to the network).

AUTHOR

Andreas Steinmetz